- Dries 3D printing filament before and during 3D printing
- Selectable drying temperature from 35 - 70C or 95 - 160F for different filaments
- Works with 1.75mm or 3mm filaments and up to 2Kg spool
- ETL Certified for product safety
- Active Drying Technology
Most filaments absorb moisture from the air readily. When moisture content goes up in a filament, the printability goes down and may lead to the filament becoming un-printable. The PrintDry filament dryer is an in-line filament dryer, which is designed to dry and to feed the filament into a 3D printer at the same time. The PrintDry unit can set up its temperature from 35-70C or 95-160F in order to dry different types of filaments, such as PLA, ABS, PETG, ASA, PP, PE, Nylon, PC, PET and TPU/TPE. It works with both 1.75 and 3 mm filaments. The PrintDry filament dryer is ETL certified for electric device safety.
Dry While 3D Printing!
With a special turn-table design, a PrintDry filament dryer can directly feed the 1.75mm or 3mm filament into a 3D printer for 3D printing while drying. The PrintDry filament dryer works with any 3D printers as long as the filament can be fed from outside the printer’s enclosure.
Dry Additional Spools While 3D Printing!
While feeding and drying one spool in the lower compartment of the dryer, additional filament spools and/or desiccants can be dried in the upper compartment while printing. Plus, drop in your desiccant packs and dry them out at the same time!